Ford Ecosport: Instrumentation and Warning Systems / Instrumentation, Message Center and Warning Chimes
DTC Charts
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation)...
Overview
The IPC uses the following methods and functionality to alert the driver of vehicle conditions:
gauges.
informational and warning indicators...
Other information:
Preliminary Inspection
Visually inspect the housing, seals, and pinion flange for obvious signs of mechanical damage.
If an obvious cause for an observed or reported concern is
found, correct the cause (if possible) before proceeding to the next
step
If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH ...
U2300:55, U2300:64
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
NOTE:
DTC U2300:55 is set in every new RCM installed until configuration data
is successfully received from the BCM . Do not install any new
components for this DTC unless directed to do so in the pinpoint test...