Ford Ecosport: Instrumentation and Warning Systems / Parking Aid
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH horn shown, RH horn similar.
Remove the headlamp assembly...
Rear Parking Aid
Item
Specification
Test object position 1 (P1) and position 5 (P5), distance from rear bumper
30 cm (12 in)
Test object position 2 (P2) and position 4 (P4), distance from rear bumper
91 cm (36 in)
Test object position 3 (P3), distance from rear bumper
170..
Other information:
Special Tool(s) /
General Equipment
303-1252Stretchy Belt Remover/ Installer ToolTKIT-2006UF-FLMTKIT-2006UF-ROW
303-1419Remover, 3.5L / 3.7L Stretchy BeltTKIT-2008SB-FLM
Removal
WARNING:
Serious injury may occur if the engine is accidently started
by another person during service work. Remove the key from the vehicle
to prevent unauthorized s..
Removal
NOTE:
The evaporative emission blocking valve is serviced with the fuel tank pressure sensor and tube.
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
Detach the retainer & remove the EVAP blocking valve electrical connector.
..