Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Diagnosis and Testing - Low One-Way Clutch Assembly
Low One Way Clutch
For low one way clutch operation,
REFER to: Transmission
Description (307-01A Automatic Transmission - 6-Speed Automatic
Transmission – 6F15, Description and Operation).
REFER to: Low One-Way Clutch Assembly (307-01B Automatic Transmission -
6-Speed Automatic Transmission – 6F35, Description and Operation).
NOTICE:
Do not clean in water or with water-based solvents. Damage to the component may occur.
NOTE:
The low one way clutch cannot be disassembled.
Clean
and inspect the low one way clutch for cracks and damaged splines. The
internal splined section should rotate clockwise and lock when rotated
counterclockwise. Check for burned or excessively worn surface. If any
damage is found or the clutch does not rotate or lock, INSTALL a new low
one way clutch.

Overdrive Clutch
For overdrive clutch operation, REFER to: Transmission
Description (307-01A Automatic Transmission - 6-Speed Automatic
Transmission – 6F15, Description and Operation)...
For TCC operation, REFER to: Transmission Description (307-01B
Automatic Transmission - 6-Speed Automatic Transmission – 6F35,
Description and Operation)...
Other information:
B0082:11, B0082:12, B0082:13, B0082:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the passenger seatbelt load limiter circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted passenger seatbelt load limite..
Removal
Position the rear seat cushion to the full forward position.
Position the carpet flap forward.
Remove the audio unit amplifier cover.
Separate the wire guide, disconnect the connectors , remove the nuts and the audio unit ampli..