Ford Ecosport Owners and Service Manuals

Ford Ecosport: Electrical Distribution / Module Configuration

Removal and Installation - Gateway Module A (GWM)

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: If installing a new module, it is necessary to upload the module configuration information to the scan tool prior to removing the module...

Description and Operation - Module Configuration - System Operation and Component Description

System Operation Programmable Module Installation (PMI) Programmable Module Installation (PMI) is a scan tool process which configures settings in a new module...

Other information:

Ford Ecosport 2014-2024 Service and Repair Manual: Removal and Installation - Driver Knee Airbag


Special Tool(s) / General Equipment Pick Hook Interior Trim Remover Removal   WARNING: The following procedure prescribes critical repair steps required for correct restraint system operation during a crash...

Ford Ecosport 2014-2024 Service and Repair Manual: General Procedures - Seatbelt Procedure After a Collision


Inspection   WARNING: All seatbelt components must be inspected and corrected as part of any collision repair. Inspect all seatbelt components as prescribed by Seatbelt Procedure After a Collision found in Section 501-20A General Procedures of this manual...

Categories

Removal and Installation - Wheel Knuckle Bushing

Special Tool(s) / General Equipment

Hydraulic Press

Removal

NOTE: Removal steps in this procedure may contain installation details.

Remove the wheel knuckle.
Refer to: Wheel Knuckle - Vehicles With: Rear Drum Brakes (204-02B Rear Suspension - AWD, Removal and Installation).
Remove the rear toe adjustment retainers and remove the wheel knuckle mounting bracket.
Torque:
  Stage 1:  177 lb.in (20 Nm)
  Stage 2:  76 lb.ft (103 Nm)

read more

Copyright © 2024 www.foecosport2.com