Ford Ecosport: Transfer Case - 6-Speed Automatic Transmission – 6F35 / General Procedures - Transfer Case Fluid Level Check
Materials
Name |
Specification |
Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant XY-75W85-QL |
WSS-M2C942-A
|
-
Follow the health and safety precautions.
Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).
-
With the vehicle in NEUTRAL, position it on a hoist.
Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
-
Remove the engine undershield.
-
Remove the PTU (Power Transfer Unit) fill plug.
-
NOTICE:
Incorrect fluid fill can result in transfer case failure.
NOTE:
Do not fill to the level of the fill plug, this will lead to filling excess oil.
Add the specified amount and type of oil through the filler
plug hole until the level reaches the bottom of the filler plug hole X: 0
mm.
Refer to: Specifications (308-07B Transfer Case - 6-Speed Automatic Transmission – 6F35, Specifications).
Material: Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant
/ XY-75W85-QL
(WSS-M2C942-A)
-
Install the PTU fill plug.
Torque:
44 lb.ft (60 Nm)
-
Install the engine undershield.
-
Torque:
18 lb.in (2 Nm)
-
Torque:
27 lb.in (3 Nm)
Principles of Operation
The AWD system may be referred to as a 4WD system in other service
information and owner literature or messages located on the message
center...
Materials
Name
Specification
Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear LubricantXY-75W85-QL
WSS-M2C942-A
Draining
Follow the health and safety precautions...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the A/C drive belt.
Refer to: Air Conditioning (A/C) Compressor Belt (303-05C Accessory
Drive - 2.0L Duratec-HE (129kW/175PS), Removal and Installation)...
B0082:11, B0082:12, B0082:13, B0082:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the passenger seatbelt load limiter circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted passenger seatbelt load limite..