Ford Ecosport Owners and Service Manuals

Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Diagnosis and Testing - Intermediate Clutch Assembly

Ford Ecosport 2014-2024 Service and Repair Manual / Automatic Transmission / Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / Diagnosis and Testing - Intermediate Clutch Assembly

Intermediate Clutch

For intermediate (2,6) clutch operation,
REFER to: Transmission Description (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Description and Operation).
REFER to: Intermediate Clutch Assembly (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Description and Operation).


  Intermediate Clutch


Condition Possible Sources Action
Intermediate (2,6) clutch does not apply SSC solenoid filter blocked CLEAN or INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
SSC is mechanically stuck OFF INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
Intermediate (2,6) clutch regulator valve stuck OFF DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve. If bore or valve is damaged, INSTALL a new main control vlave body.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
SSC VBS CB26, CB26 hydraulic circuits blocked or leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
CB26 hydraulic circuit blocked or leaking DISASSEMBLE and INSPECT the transmission case passages for debris/blockage. CLEAN as necessary.
Rear planetary sun gear and shell assembly INSPECT the sun gear and shell for wear and damage. INSTALL new components as necessary.
Intermediate (2,6) clutch friction plates DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
Intermediate (2,6) clutch piston seal leakage INSPECT the intermediate (2,6) clutch piston and seals. INSTALL new components as necessary.
Intermediate (2,6) clutch always applied SSC solenoid O-rings cut/damaged INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
SSC mechanically stuck ON INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
Intermediate (2,6) clutch regulator valve stuck ON DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve and spring. If bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
VBS CB26, CB26 hydraulic circuits leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for leakage. INSTALL new components as necessary.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
Rear planetary sun gear and shell assembly INSPECT the sun gear and shell for damage that would prevent free rotation. INSTALL new components as necessary.
Intermediate (2,6) clutch friction plates DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
Intermediate (2,6) clutch piston return spring INSPECT the return spring for proper installation or damage. INSTALL new components as necessary.
Intermediate (2,6) clutch delayed/soft/slipping apply Incorrect Transmission Strategy programmed into PCM Remove SSC and record solenoid band number.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
Using the scan tool, verify the correct band number is stored in the PCM . If the band numbers do not match, INSTALL a new SSC with correct band number.
SSC solenoid filter partially blocked or restricted CLEAN or INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
SSC mechanically sticking INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
Intermediate (2,6) clutch regulator valve sticking DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve. If bore or valve is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
VBS CB26, CB26 hydraulic circuits blocked or leaking DISASSEMBLE and INSPECT the main control vlave body and separator plate passages for debris/blockage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
CB26 supply hydraulic circuit blocked or leaking DISASSEMBLE and INSPECT the transmission case passages for debris/blockage. CLEAN as necessary.
Intermediate (2,6) clutch friction plates DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
Intermediate (2,6) clutch piston seal leakage INSPECT the intermediate (2,6) clutch piston and seals. INSTALL new components as necessary.
Intermediate (2,6) clutch harsh apply Incorrect Transmission Strategy programmed into PCM Remove SSC and record solenoid band number.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
Using the scan tool, verify the correct band number is stored in the PCM . If the band numbers do not match, INSTALL a new SSC with correct band number.
SSC mechanically sticking INSTALL a new solenoid.
REFER to: Solenoid (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Removal and Installation).
Intermediate (2,6) clutch regulator valve sticking DISASSEMBLE, CLEAN and INSPECT the intermediate (2,6) clutch regulator valve and spring. If bore, valve or spring is damaged, INSTALL a new main control valve body.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
VBS CB26, CB26 hydraulic circuits blocked or leaking DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage/leakage. CLEAN as necessary.
REFER to: Main Control Valve Body (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Overhaul).
Intermediate (2,6) clutch friction plates DISASSEMBLE and INSPECT the intermediate (2,6) clutch friction and steel plates. INSTALL new components as necessary.
Intermediate (2,6) clutch piston return spring INSPECT the return spring for proper installation and damage. INSTALL new components as necessary.

    Diagnosis and Testing - Direct Clutch Assembly

    Direct Clutch For direct (3,5,R) clutch operation, REFER to: Transmission Description (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Description and Operation)...

    Diagnosis and Testing - Low/Reverse Clutch Assembly

    Low/Reverse Clutch For low/reverse clutch operation, REFER to: Transmission Description - System Operation and Component Description (307-01B Automatic Transmission - 6-Speed Automatic Transmission – 6F35, Description and Operation)...

    Other information:

    Ford Ecosport 2014-2024 Service and Repair Manual: Description and Operation - Interior Lighting - Overview


    Overview The interior lighting system consists of: Courtesy lamps Demand lamps Ambient lighting The courtesy lamps subsystem consists of: Interior lamps Door ajar switches (integrated into the door latches) Courtesy lamp switch (integrated into the front interior lamp) BCM The courtesy lamps provide illumination t..

    Ford Ecosport 2014-2024 Service and Repair Manual: Removal and Installation - Front Door Window Regulator Motor


    Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front door window regulator. Refer to: Front Door Window Regulator (501-11 Glass, Frames and Mechanisms, Removal and Installation). Remove the front door window regulator motor. Remove the front door window regulator motor bolt. Torque: 35 lb.i..

    Categories

    Description and Operation - Health and Safety Precautions

    General Service Warnings

    Review carefully the information below before beginning any repair. Following these warnings is a list of specific system warnings that must be reviewed before beginning work on any listed system.

      WARNING: Wear eye and ear protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.

    read more

    Copyright © 2024 www.foecosport2.com