Ford Ecosport Owners and Service Manuals

Ford Ecosport: Electronic Engine Controls - 2.0L Duratec-HE (129kW/175PS) / Description and Operation - Electronic Engine Controls - Overview

Overview

The EEC system provides optimum control of the engine through the enhanced capability of the powertrain control module (PCM). The EEC system also has an on board diagnostic (OBD) monitoring system with features and functions to meet federal regulations on exhaust emissions.

The EEC system has two major divisions: hardware and software. The hardware includes the PCM, sensors, switches, actuators, solenoids, and interconnecting terminals. The software in the PCM provides the strategy control for outputs (engine hardware) based on the values of the inputs to the PCM.

The PCM receives information from a variety of sensor and switch inputs. Based on the strategy and calibration stored within the PCM, the PCM generates the appropriate output. The system is designed to minimize emissions and optimize fuel economy and driveability. The software strategy controls the basic operation of the engine, provides the OBD strategy, controls the malfunction indicator lamp (MIL), communicates to the scan tool over the data link connector (DLC), allows for flash electrically erasable programmable read only memory (EEPROM), provides idle air and fuel trim, and controls failure mode effects management (FMEM).

    Description and Operation - Electronic Engine Controls - Component Location

    ..

    Description and Operation - Electronic Engine Controls - System Operation and Component Description

    System Operation Auto Start Stop The auto start stop system helps reduce fuel consumption and decrease emissions by automatically shutting down the engine when the vehicle stops and the engine is idling, usually within 1500 ms (1...

    Other information:

    Ford Ecosport 2014-2025 Service and Repair Manual: Description and Operation - Input Shaft


    Input Shaft Exploded View Item Description 1 Direct (3, 5, R)/overdrive (4, 5, 6) clutch hub 2 Input shaft 3 Direct (3, 5, R) clutch 4 Overdrive (4, 5, 6) clutch 5 Center planetary sun gear Input Shaft Cu..

    Ford Ecosport 2014-2025 Service and Repair Manual: General Procedures - Adaptive Learning Drive Cycle


    Initialization NOTE: The engine and transmission must be at normal operating temperature. Using the scan tool, clear the DTC and Transmission Adaptive Tables. Bring the transmission to normal operating temperature. With the engine running and the brake applied, select the gears in the following order, pausing in each gear for 4 se..

    Categories

    Description and Operation - Health and Safety Precautions

    General Service Warnings

    Review carefully the information below before beginning any repair. Following these warnings is a list of specific system warnings that must be reviewed before beginning work on any listed system.

      WARNING: Wear eye and ear protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.

    read more

    Copyright © 2025 www.foecosport2.com