Ford Ecosport: Automatic Transmission - 6-Speed Automatic Transmission – 6F35 / General Procedures - Transmission Fluid Exchange
Materials
Name |
Specification |
Motorcraft® MERCON® LV Automatic Transmission Fluid XT-10-QLVC |
WSS-M2C938-A MERCON® LV,
|
Connect
-
With the vehicle in NEUTRAL, position it on a hoist.
-
Use the Fluid Exchanger to change the fluid.
Material: Motorcraft® MERCON® LV Automatic Transmission Fluid
/ XT-10-QLVC
(WSS-M2C938-A)
(MERCON® LV, )
-
Connect the Fluid Exchanger to the transmission
fluid cooler tube after the transmission fluid cooler on the return
tube. This will help remove any foreign material trapped in the
transmission fluid coolers.
-
Perform the transmission fluid exchange using the Fluid Exchanger.
Follow the manufacturer's instructions included with the machine.
-
Once the transmission fluid exchange is completed, disconnect the Fluid
Exchanger. Reconnect any disconnected transmission fluid cooler tubes.
-
Check the transmission fluid level.
Refer to: Transmission Fluid Level Check (307-01B)
.
Materials
Name
Specification
Motorcraft® MERCON® LV Automatic Transmission FluidXT-10-QLVC
WSS-M2C938-AMERCON® LV,
Draining
With the vehicle in NEUTRAL, position it on a hoist...
Materials
Name
Specification
Motorcraft® MERCON® LV Automatic Transmission FluidXT-10-QLVC
WSS-M2C938-AMERCON® LV,
Check
Connect the diagnostic scan tool to the vehicle...
Other information:
System Diagram
Item
Description
1
BCM
2
Dimmer Switch
3
Autolamp/ Sunload Sensor
4
LF Door Window Switch
5
RDM - LH
6
LIN
7
DDM
8
RF Door Window Switch
9
PDM
10
RDM - RH
11
LIN
12
RR Door Window Sw..
B00A0:11, B00A0:12, B1123:11, B1123:12
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The BECMB provides battery voltage to the RCM and OCSM . The BECMB
monitors each circuit for a short to voltage or a short to ground.
If a fault is detected, the BECMB stores the appropriate DTC in
memory and sends a message ..