Ford Ecosport: Fuel Tank and Lines - 2.0L Duratec-HE (129kW/175PS) / Diagnosis and Testing - Fuel Tank and Lines

Ford Ecosport 2014-2024 Service and Repair Manual / Fuel System / Fuel Tank and Lines - 2.0L Duratec-HE (129kW/175PS) / Diagnosis and Testing - Fuel Tank and Lines

Diagnostic Trouble Code (DTC) Chart

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

Module	DTC	Description	Action
PCM	P008A:00	Low Pressure Fuel System Pressure - Too Low: No Sub Type Information	GO to Pinpoint Test HC
PCM	P008B:00	Low Pressure Fuel System Pressure - Too High: No Sub Type Information	GO to Pinpoint Test HC
PCM	P00BA:00	Low Fuel Pressure -Forced Limited Power: No Sub Type Information	GO to Pinpoint Test HC
PCM	P00BB:00	Fuel Injector Insufficient Flow -Forced Limited Power: No Sub Type Information	GO to Pinpoint Test HC
PCM	P0148:00	Fuel Delivery Error: No Sub Type Information	GO to Pinpoint Test HC
PCM	P0230:00	Fuel Pump Primary Circuit: No Sub Type Information	GO to Pinpoint Test KC
PCM	P0231:00	Fuel Pump Secondary Circuit Low: No Sub Type Information	GO to Pinpoint Test KC
PCM	P0232:00	Fuel Pump Secondary Circuit High: No Sub Type Information	GO to Pinpoint Test KC
PCM	P025A:00	Fuel Pump Module 'A' Control Circuit/Open: No Sub Type Information	GO to Pinpoint Test KC
PCM	P025B:00	Fuel Pump Module 'A' Control Circuit Range/Performance: No Sub Type Information	GO to Pinpoint Test KC
PCM	P025C:00	Fuel Pump Module 'A' Control Circuit Low: No Sub Type Information	GO to Pinpoint Test KC
PCM	P025D:00	Fuel Pump Module 'A' Control Circuit High: No Sub Type Information	GO to Pinpoint Test KC
PCM	P027B:00	Fuel Pump Module 'B' Control Circuit Range/Performance: No Sub Type Information	GO to Pinpoint Test KC
PCM	P0627:00	Fuel Pump 'A' Control Circuit/Open: No Sub Type Information	GO to Pinpoint Test KC
PCM	P064A:00	Fuel Pump Control Module 'A': No Sub Type Information	GO to Pinpoint Test KC
PCM	P166A:00	Restraints Deployment Communication Circuit: No Sub Type Information	GO to Pinpoint Test KC
PCM	P2632:00	Fuel Pump 'B' Control Circuit/Open: No Sub Type Information	GO to Pinpoint Test KC
PCM	P26EA:00	Fuel Pump Control Module 'B': No Sub Type Information	GO to Pinpoint Test KC
PCM	U0109:00	Lost Communication With Fuel Pump Control Module 'A': No Sub Type Information	GO to Pinpoint Test KC
PCM	U016C:00	Lost Communication With Fuel Pump Control Module 'B': No Sub Type Information	GO to Pinpoint Test KC
PCM	U210B:00	Lost Communication Between Fuel Pump Control Module 'A' and Restraints Control Module: No Sub Type Information	GO to Pinpoint Test KC

Global Customer Symptom Code (GCSC) Chart

Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).

Symptom	Action
Start/Run/Move > Starting > Hard Start/Long Crank > Always	GO to Pinpoint Test HC
Start/Run/Move > Starting > Hard Start/Long Crank > Hot	GO to Pinpoint Test HC
Driving Performance > Lack/Loss of Power > Cruise/ Steady Speed > Always	GO to Pinpoint Test HC
Driving Performance > Hesitates/Stumble > Cruise/ Steady Speed > Hot	GO to Pinpoint Test HC

Pinpoint Tests

PINPOINT TEST HC: FUEL DELIVERY SYSTEM

Introduction

WARNING: Before working on or disconnecting any of the fuel tubes or fuel system components, relieve the fuel system pressure to prevent accidental spraying of fuel. Fuel in the fuel system remains under high pressure, even when the engine is not running. Failure to follow this instruction may result in serious personal injury.

WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

WARNING: Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

WARNING: When handling fuel, always observe fuel handling precautions and be prepared in the event of fuel spillage. Spilled fuel may be ignited by hot vehicle components or other ignition sources. Failure to follow these instructions may result in serious personal injury.

WARNING: Clean all fuel residue from the engine compartment. If not removed, fuel residue may ignite when the engine is returned to operation. Failure to follow this instruction may result in serious personal injury.

WARNING: Fuel may remain pressurized in some fuel lines after the Fuel System Pressure Release procedure. Wear safety gloves and a face shield when disconnecting pressure lines to avoid skin and eye contact. Failure to follow this instruction may result in serious personal injury.

NOTE: Replacement fuel injectors may not be the same color as the original injectors in the vehicle. Verify the replacement injector is correct for the application by part number.

NOTE: With the engine running, the FRP PID value may be higher than a fuel pressure reading taken with a mechanical gauge.

Normal Operation and Fault Conditions

Refer to the DTC Fault Trigger Conditions.

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Condition
PCM P008A:00	Low Pressure Fuel System Pressure - Too Low: No Sub Type Information	Sets when PCM detects the low pressure fuel system pressure falls below an expected threshold.
PCM P008B:00	Low Pressure Fuel System Pressure - Too High: No Sub Type Information	Sets when PCM detects the low pressure fuel system pressure rises above an expected threshold.
PCM P00BA:00	Low Fuel Pressure -Forced Limited Power: No Sub Type Information	Sets when PCM detects the fuel delivery volume is less than the requested fuel delivery volume and the PCM has reduced engine power as a result.
PCM P00BB:00	Fuel Injector Insufficient Flow -Forced Limited Power: No Sub Type Information	Sets when PCM detects the requested fuel delivery volume is greater than the fuel injectors maximum delivery volume. A high fuel ethanol content combined with pulling or carrying a heavy load up a steep grade could set this DTC . A high fuel ethanol content combined with pulling or carrying a heavy load up a steep grade could set this DTC .
PCM P0148:00	Fuel Delivery Error: No Sub Type Information	Sets when PCM detects at least one bank is lean at WOT .

Possible Sources

High ethanol content
Fuel supply line
Low fuel level
MAF sensor
Fuel pressure sensor
Fuel filter (9155)
Fuel injector (9F593)
Fuel pump (9H307)

PINPOINT TEST KC: FUEL PUMP CONTROL MODULE

Introduction

Normal Operation and Fault Conditions

Refer to the DTC Fault Trigger Conditions.

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Condition
PCM P0230:00	Fuel Pump Primary Circuit: No Sub Type Information	Sets when the PCM detects a concern from the fuel pump or fuel pump relay power (FPRPWR) circuits.
PCM P0231:00	Fuel Pump Secondary Circuit Low: No Sub Type Information	Sets when the PCM commands the fuel pump on and the voltage from the fuel pump monitor circuit is not detected.
PCM P0232:00	Fuel Pump Secondary Circuit High: No Sub Type Information	Sets when the PCM detects voltage from the fuel pump monitor circuit while the fuel pump is commanded off. The fuel pump monitor circuit is wired to a pull-up voltage inside the PCM . The fuel pump monitor circuit goes high if, with the KOEO and the fuel pump commanded off, the fuel pump monitor/fuel pump power circuit loses its path to ground through the fuel pump. The fuel pump monitor circuit also goes high if the fuel pump monitor /fuel pump power circuit is short to voltage.
PCM P025A:00	Fuel Pump Module 'A' Control Circuit/Open: No Sub Type Information	Sets when the PCM detects an open, short to voltage or short to grond from ground the fuel pump command. When the PCM commands the fuel pump ON, the PCM is able to detect a short to voltage on the fuel pump command circuit. When the PCM commands the fuel pump OFF, the PCM is able to detect an open circuit or a short to ground from the fuel pump command circuit.
PCM P025B:00	Fuel Pump Module 'A' Control Circuit Range/Performance: No Sub Type Information	Sets when the PCM detects the fuel pump control module is still reporting an invalid duty cycle or frequency from the PCM after a calibrated amount of time. The fuel pump control module monitors the duty cycle and frequency of the signal it receives from the PCM . The fuel pump control module determines if the signal from the PCM on the fuel pump command circuit is a valid duty cycle and frequency. If the duty cycle or frequency is invalid, the fuel pump control module sends a 20% duty cycle signal on the fuel pump monitor circuit to report the concern to the PCM .
PCM P025C:00	Fuel Pump Module 'A' Control Circuit Low: No Sub Type Information	Sets when the PCM detects a short to ground from the fuel pump command circuit. When the PCM commands the fuel pump ON, the PCM is able to detect a short to voltage from the fuel pump command circuit. When the PCM commands the fuel pump OFF, the PCM is able to detect an open circuit or a short to ground from the fuel pump command circuit.
PCM P025D:00	Fuel Pump Module 'A' Control Circuit High: No Sub Type Information	Sets when the PCM detects the fuel pump command circuit is open or short to voltage. When the PCM commands the fuel pump on, the PCM is able to detect a short to voltage from the fuel pump command circuit. When the PCM commands the fuel pump off, the PCM is able to detect an open circuit or a short to ground from the fuel pump command circuit.
PCM P027B:00	Fuel Pump Module 'B' Control Circuit Range/Performance: No Sub Type Information	Sets when the PCM detects the fuel pump control module 2 is reporting an invalid duty cycle or frequency from the PCM after a calibrated amount of time. The fuel pump control module 2 monitors the duty cycle and frequency of the signal it receives from the PCM . The fuel pump control module 2 determines if the signal from the PCM from the fuel pump command circuit is a valid duty cycle and frequency. If the duty cycle or frequency is invalid, the fuel pump control module 2 sends a 20% duty cycle signal on the FPM2 circuit to report the concern to the PCM .
PCM P0627:00	Fuel Pump 'A' Control Circuit/Open: No Sub Type Information	Sets when the PCM detects the fuel pump control module is reporting a concern with the fuel pump module or secondary circuits after a calibrated amount of time. The fuel pump control module monitors the fuel pump module and secondary circuits for a concern. If the fuel pump control module detects a concern with the fuel pump module or secondary circuits, the fuel pump control module sends an 80% duty cycle signal on the fuel pump monitor circuit to report the concern to the PCM .
PCM P064A:00	Fuel Pump Control Module 'A': No Sub Type Information	Sets when the PCM detects the fuel pump control module has an internal concern. Clear the PCM Diagnostic Trouble Codes (DTCs). Repeat the self-test. If the DTC is retrieved again, install a new fuel pump control module. Refer to the appropriate 303-04 section, Fuel Charging And Controls.
PCM P166A:00	Restraints Deployment Communication Circuit: No Sub Type Information	Sets when the PCM detects an open or short from the impact event signal circuit.
PCM P2632:00	Fuel Pump 'B' Control Circuit/Open: No Sub Type Information	Sets when the PCM detects the fuel pump control module 2 is reporting a concern with the fuel pump module or secondary circuits after a calibrated amount of time. The fuel pump control module 2 monitors the fuel pump module and secondary circuits for a concern. If the fuel pump control module 2 detects a concern with the fuel pump module or secondary circuits, the fuel pump control module 2 sends an 80% duty cycle signal on the fuel pump monitor 2 circuit to report the concern to the PCM .
PCM P26EA:00	Fuel Pump Control Module 'B': No Sub Type Information	Sets when the PCM detects the fuel pump control module 2 has an internal concern. Clear the PCM Diagnostic Trouble Codes (DTCs). Repeat the self-test. If the DTC is retrieved again, install a new fuel pump control module 2. Refer to the appropriate 303-04 section, Fuel Charging And Controls.
PCM U0109:00	Lost Communication With Fuel Pump Control Module 'A': No Sub Type Information	Sets when the PCM does not detect a duty cycled signal from the fuel pump monitor circuit after a calibrated amount of time. The PCM monitors the fuel pump monitor circuit for the presence of a duty cycled signal. If the fuel pump monitor circuit is fixed at a low or high voltage, the PCM begins to increment a counter.
PCM U016C:00	Lost Communication With Fuel Pump Control Module 'B': No Sub Type Information	Sets when the PCM does not detect a duty cycled signal from the fuel pump monitor 2 circuit after a calibrated amount of time. The PCM monitors the fuel pump monitor 2 circuit for the presence of a duty cycled signal. If the fuel pump monitor 2 circuit is fixed at a low or high voltage, the PCM begins to increment a counter.
PCM U210B:00	Lost Communication Between Fuel Pump Control Module 'A' and Restraints Control Module: No Sub Type Information	Sets when the PCM detects the fuel pump control module is reporting an invalid duty cycle or frequency from the RCM after a calibrated amount of time. The fuel pump control module monitors the duty cycle and frequency of the signal it receives from the RCM . The fuel pump control module determines if the signal on the event notification signal circuit from the RCM is a valid duty cycle and frequency. If the duty cycle or frequency is invalid, the fuel pump control module sends a 40% duty cycle signal on the fuel pump monitor circuit to report the concern to the PCM .

Possible Sources

Fuel pump circuitry concern
Emergency notification signal circuitry concern
Fuel pump control module relay
Fuel pump control module (9D370)
Fuel pump (9H307)
IFS switch (9341)
RCM
PCM (12A650)

Description and Operation - Fuel Tank and Lines - System Operation and Component Description

System Operation Fuel Systems The fuel system supplies the fuel injectors with clean fuel at a controlled pressure. The PCM controls the fuel pump and monitors the fuel pump circuit...

Removal and Installation - Fuel Filter

Removal NOTE: Removal steps in this procedure may contain installation details. Refer to: Fuel System Pressure Release (310-00C Fuel System - General Information - 2...

Other information:

Ford Ecosport 2014-2024 Service and Repair Manual: Removal and Installation - Rear Door Glass Top Run

Removal NOTE: LH side shown, RH side similar. NOTE: Removal steps in this procedure may contain installation details. Remove the rear door window control switch. Refer to: Rear Door Window Control Switch (501-11 Glass, Frames and Mechanisms, Removal and Installation)...

Ford Ecosport 2014-2024 Service and Repair Manual: General Procedures - Heated Window Grid Wire Repair

Materials Name Specification Motorcraft® Ultra-Clear Spray Glass CleanerZC-23 ESR-M14P5-A Motorcraft® Rear Window Defroster RepairPM-11 WSB-M4J58-B Motorcraft® Lacquer Touch-Up PaintPMPC-19500-XXXXA, PMPM-19500-XXXXG, PMPP-19500-XXXXA ESR-M2P100-C Repair NOTE: The antenna and heated window grid line material is not..

Removal and Installation - Front Stabilizer Bar

Special Tool(s) / General Equipment

Tie Rod End Remover Transmission Jack

Removal

NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

NOTE: Removal steps in this procedure may contain installation details.

NOTICE: Disconnect the b