Ford Ecosport: Automatic Transmission External Controls / Description and Operation - External Controls - Overview
Overview
The transmission selector lever linkage consists of:
-
a selector lever cable that connects the transmission manual control lever to the selector lever assembly.
-
a brake shift interlock actuator that is integral to the selector lever assembly.
The selector lever assembly:
-
locks the transmission selector lever in the P position when the ignition switch is in the LOCK position
-
requires the transmission selector lever to be in the P position to turn the ignition switch to the LOCK position.
-
if equipped, has a SelectShift® switch mounted to the
selector lever knob that allow the driver to manually shift the
transmission.
The steering wheel:
-
if equipped, has SelectShift® paddle switches mounted to
it that allow the driver to manually shift the transmission.
System Operation
Both the 6F15 and 6F35 transmission have 5 range positions P , R , N
, D and S with a SelectShift® switch mounted on the selector lever knob
or SelectShift® paddle switches mounted on the steering wheel...
Other information:
Vehicle Identification Number (VIN)
VIN Locator
The VIN is a 17-digit combination of letters and numbers. The VIN is
printed on a metal tab attached to vehicle and visible through the
windshield lower left corner. The VIN is also found on the VC label
located on driver's side B pillar lower...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Module
DTC
Description
Action
PCM
P0087:00
Fuel Rail/System Pressure - Too Low (Bank 1): No Sub Type Information
GO to Pinpoint Test DD
..