Ford Ecosport Owners and Service Manuals

Ford Ecosport: General Information / Description and Operation - Climate Control System Health and Safety Precautions

Ford Ecosport 2014-2024 Service and Repair Manual / Service Information / General Information / Description and Operation - Climate Control System Health and Safety Precautions

  WARNING: Only qualified technicians are allowed to work on air conditioning (A/C) systems.

  WARNING: Air conditioning (A/C) system components can become particularly hot or cold.

  WARNING: Make sure that the air conditioning (A/C) system is at ambient temperature before carrying out any repair.

  WARNING: When handling refrigerants, always wear protective goggles and gloves made of fluoroelastomer. Leather or fabric gloves are not suitable.

  WARNING: SKIN CONTACT: If liquid refrigerant comes into contact with the skin, it produces severe frostbite. Immediately flush affected areas with plenty of cold running water for 15 minutes. Seek medical attention.

  WARNING: EYE CONTACT: If refrigerant comes into contact with the eyes, immediately flush the eyes with plenty of running water for 15 minutes. Seek medical attention.

  WARNING: INHALED: Toxic gases generated when refrigerant is heated are hazardous to health. The gases have an irritating smell and can cause lung damage. The symptoms can continue for a long time after having been in contact with the gases. The gases can cause lung damage even if the amount of gas in the air is too small to smell.

  WARNING: Refrigerant is flammable and explosive.

  WARNING: Make sure that refrigerant bottles are not exposed to temperatures greater than 45°C.

  WARNING: Make sure that the local regulations regarding work on air conditioning (A/C) systems are adhered to.

  WARNING: Make sure that refrigerant bottles are closed properly.

  WARNING: Gaseous refrigerant has a higher density than air. There is a danger of suffocation when working close to the ground or in workshop pits.

  WARNING: Provide adequate ventilation when handling refrigerant.

  WARNING: Never release refrigerant into the atmosphere.

  WARNING: Only use special tools, equipment and lubricants that are approved for the type of refrigerant being used.

  WARNING: Always follow the manufacturer’s instructions for the correct servicing unit operating procedure.

NOTICE: Do not mix refrigerant oils for different types of refrigerant.

NOTICE: Never mix different types of refrigerant or equipment intended for them.

NOTICE: Only use refrigerant in gas form when filling the system through the low-pressure connection.

NOTICE: Only use refrigerant in liquid form when filling the system through the high-pressure connection.

NOTICE: Refrigerant attacks certain plastics. Only use seals suitable for refrigerant.

NOTICE: If the air conditioning (A/C) compressor is damaged, the fixed orifice tube can become blocked with metal particles.

NOTICE: Any sort of blockage in the refrigerant circuit will damage the air conditioning (A/C) compressor irreparably.

NOTICE: If the air conditioning (A/C) system has been opened for a period greater than 2 hours, a new receiver drier must be installed and the evacuating time to be increased by a minimum of 2 hours.

NOTE: New air conditioning (A/C) compressors are delivered prefilled.

NOTE: Refrigerant oil in new air conditioning (A/C) compressors can contain Teflon, visible as white particles, which will not harm the system.

    Description and Operation - Road/Roller Testing

    Road or roller testing may be carried out for various reasons and a procedure detailing pre-test checks, engine starting and stopping, pre-driving checks, on-test checks and final checks to be completed on completion of the test is given below...

    Description and Operation - Battery and Battery Charging Health and Safety Precautions

      WARNING: Batteries contain sulphuric acid, avoid contact with skin, eyes or clothing. Wear safety goggles when working near the battery to protect against possible splashing of the acid solution...

    Other information:

    Ford Ecosport 2014-2024 Service and Repair Manual: Removal and Installation - Telematics Control Unit (TCU) Module Antenna


    Removal Remove the instrument panel. Refer to: Instrument Panel (501-12 Instrument Panel and Console, Removal and Installation). Disconnect the TCU antenna cable connector, remove the bolt and the TCU antenna. Installation To install, reverse the removal procedure...

    Ford Ecosport 2014-2024 Service and Repair Manual: Removal and Installation - Rear Wheelhouse Outer


    Special Tool(s) / General Equipment Spherical Cutter Air Body Saw MIG/MAG Welding Equipment Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NOTE: LH side shown, RH side similar...

    Categories

    Removal and Installation - Front Stabilizer Bar

    Special Tool(s) / General Equipment

    Tie Rod End Remover Transmission Jack

    Removal

    NOTICE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

    NOTE: Removal steps in this procedure may contain installation details.

    NOTICE: Disconnect the b

    read more

    Copyright © 2024 www.foecosport2.com