Ford Ecosport: Wheels and Tires / Specifications
Material
| Item | Specification | Fill Capacity |
|---|---|---|
| High Temperature Nickel Anti-Seize Lubricant XL-2 | - | - |
| Motorcraft® Wheel and Tire Cleaner ZC-37-A | - | - |
General Specifications
| Item | Specification |
|---|---|
| Tire Inflation | |
| Tires | See Safety Certification Label on driver door jamb |
| Wheel Weights | |
| Wheel weight type | Use a wheel weight manufacturer's rim gauge to determine the correct wheel weight application |
Torque Specifications
| Item | Nm | lb-ft | lb-in |
|---|---|---|---|
| Valve stem-to-TPMS sensor screw | 1.5 | - | 13 |
| Wheel nutsa | - | - | - |
aRefer to the procedure in this section.
Description and Operation - Safety Precautions - Overview
Overview
Before beginning any service procedure in this manual, refer to health
and safety warnings in section 100-00 General Information. Failure to
follow this instruction may result in serious personal injury...
Other information:
Ford Ecosport 2014-2025 Service and Repair Manual: Removal and Installation - Steering Column Control Module (SCCM)
Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: This step is only necessary when installing a new component. NOTE: The PMI process must begin with the current SCCM installed. If the current SCCM does not respond to the diagnostic scan tool, the tool may prompt for As-Built data as part of the repair...
Ford Ecosport 2014-2025 Service and Repair Manual: Removal and Installation - Tire Pressure Monitoring System (TPMS) Sensor
Removal WARNING: The Tire Pressure Monitoring System (TPMS) sensor battery may release hazardous chemicals if exposed to extreme mechanical damage. If these chemicals contact the skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention...
Categories
- Manuals Home
- 2nd Gen Ford Ecosport Service Manual (2014 - 2025)
- Description and Operation - Evaporative Emissions - System Operation and Component Description
- Engine
- Removal and Installation - Block Heater
- Climate Control System - General Information
- Removal and Installation - Starter Motor
Removal and Installation - Oil Pressure Switch
Materials
Name Specification Motorcraft® Thread Sealant with PTFETA-24-B WSK-M2G350-A2
Removal
NOTE: Removal steps in this procedure may contain installation details.
With the vehicle in NEUTRAL, position it on a hoist.Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
If equipped, remove the bolts and the underbody shield.
Copyright © 2025 www.foecosport2.com