Ford Ecosport: Steering Wheel and Column Electrical Components / Removal and Installation - Steering Wheel Multifunction Switch
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH steering wheel multifunction switch shown, RH switch similar.
-
Remove the driver airbag.
Refer to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation).
-
Disconnect the steering wheel multifunction switch electrical connector.
-
Remove the retainers and remove the steering wheel multifunction switch.
Installation
-
To install, reverse the removal procedure.
Special Tool(s) /
General Equipment
Pick Hook
Removal
NOTE:
Removal steps in this procedure may contain installation details...
Other information:
Removal
Remove the high-pressure fuel pump.
Refer to: High-Pressure Fuel Pump (303-04C Fuel Charging and Controls -
2.0L Duratec-HE (129kW/175PS), Removal and Installation).
During the removal or installation of components,
cap, tape or otherwise appropriately protect all openings and
tubes/fittings to prevent the ingress of dirt or other con..
Special Tool(s) /
General Equipment
Flat-Bladed Screwdriver
Interior Trim Remover
Removal
Lower the steering column adjustment lock.
Fully extend and lower the steering column.
Release the tabs and disconnect the gap hider from the upper steering column shroud.
Use the Gen..