Ford Ecosport: Parking Brake and Actuation / Removal and Installation - Parking Brake Front Cable
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Left hand drive (LHD) shown, right hand drive (RHD) similar.
-
Remove the parking brake control.
Refer to: Parking Brake Control (206-05 Parking Brake and Actuation, Removal and Installation).
-
Remove the parking brake front cable.
-
Release the parking brake front cable grommet.
-
Remove parking brake front cable from the parking brake control.
Installation
-
To install, reverse the removal procedure.
-
Adjust the parking brake cables.
Refer to: Parking Brake Cable Adjustment - Vehicles With: Rear Drum
Brakes (206-05 Parking Brake and Actuation, General Procedures).
Refer to: Parking Brake Cable Adjustment - Vehicles With: Rear Disc
Brakes (206-05 Parking Brake and Actuation, General Procedures).
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LHD shown, RHD similar.
All vehicles
Remove the floor console...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
To prevent setting Diagnostic Trouble Codes (DTCs), make
sure that the Transmission shifter is in P position (Parking).
NOTE:
Make sure the ignition switch is in the OFF position for at
least 30 seconds, prior to disconnect the accelerator pedal electrical
connector.
..
Special Tool(s) /
General Equipment
Rust Protection Coating Gun
Undercoating Gun
Materials
Name
Specification
ValuGard™ Premium UndercoatingVG101, VG101A
-
ValuGard™ Rust InhibitorVG104, VG104A
-
Motorcraft® Metal Surface Prep WipesZC-31-B
-
Repair
NOTE:
Undercoating
NOTE:
The follo..