Ford Ecosport: Battery, Mounting and Cables / Description and Operation - Battery and Cables - Overview
Overview
The battery and cable system consists of the following components:
-
Battery
-
Battery monitoring sensor
-
Battery tray
-
High current BJB
-
Negative battery cable
-
Positive battery cable
Battery Specifications
Vehicles with AUTO-START-STOP
Item
Specification
Voltage
12 Volts
Cold Cranking Amps (CCA) measured at -18 C (-0...
System Operation
Battery and Cables
Vehicles are equipped with a 12-volt, maintenance-free battery. The
battery is a 12V DC source connected in a negative ground system and is a
voltage stabilizer for the 12V electrical system...
Other information:
B1415:11, B1415:12, B1415:13, B1415:96, B1418:11, B1418:12, B1418:13, B1418:96
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM monitors the passenger front door and driver C-pillar side impact sensor circuits for the following faults:
Open circuit
Short to voltage
Short to ground
..
Special Tool(s) /
General Equipment
Interior Trim Remover
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the intrusion sensor.
Disconnect the electrical connectors.
Use the General Equipment: Interior Trim Remover
Installation
To install, reverse ..