Ford Ecosport: Rear Suspension - FWD / Description and Operation - Rear Suspension - Overview
Overview
The rear suspension consists of the following components:
-
Twist-beam axle (torsionally rigid axle)
-
Coil springs
-
Shock absorbers
-
Rear axle bushings
-
Wheel bearing and wheel hub assemblies
-
Wheel studs
Characteristics of rear axle:
Single-pipe
gas shock absorbers with stable damping performance for optimum
handling. Axle suspension uses large rubber bushes for optimum ride
comfort.
Function
If
compression takes place on both wheels evenly (for example when a load
is placed on the vehicle), the whole axle unit swivels evenly in the
rubber-metal bearings. If only one wheel is compressed, the cross-beam
twists (undergoes torsion) and acts as a stabilizer.This minimizes track
and toe changes.
Special Tool(s) /
General Equipment
Spring Compressor
Vise
Removal
NOTICE:
Suspension fasteners are critical parts that affect the
performance of vital components and systems...
Other information:
Removal
Remove the components for access.
Remove the IPC .
Refer to: Instrument Panel Cluster (IPC) (413-01 Instrumentation, Message Center and Warning Chimes, Removal and Installation).
Remove the FDIM .
Separate the wiring guides, disconnect the LVDS cable connector and remove the LVDS cable...
Removal
WARNING:
The Tire Pressure Monitoring System (TPMS) sensor
battery may release hazardous chemicals if exposed to extreme mechanical
damage. If these chemicals contact the skin or eyes, flush immediately
with water for a minimum of 15 minutes and get prompt medical attention...